JEWELLERY CARE GUIDE

Each piece of jewellery is made with longevity in mind, from design through prototyping, development and final production. To ensure the originality and sustainability of your Tom Wood jewellery, we recommend reading our jewellery care guide thoroughly.

Tom Wood jewellery is handcrafted in Thailand at some of the best factories in the world, using locally sourced, recycled materials. Experienced specialists maintain each step in our development and manufacturing process to secure the best possible quality. Nevertheless each piece is delicate and requires to be handled with care.

Remove your jewellery when in contact with hard surfaces, when cleaning, bathing and sleeping, and always keep away from any source of heat. Avoid direct contact with water and chemical products. Chlorine, make-up, soap, perfume and hair-spray may dull the finish of your jewellery and cause discoloration or oxidation on the metal. Stones connected to your jewellery might also be affected by water, chemicals and damp conditions. 

Do not store your jewellery in the bathroom. Following these instructions will reduce abrasions and prolong the luster.

Please handle your jewellery with care and avoid collision with hard surfaces, as it could change the shape of the jewellery and stones could break or fall out. In particular rings as they are more exposed. Kindly note that layering a ring with another ring can cause wear and tear, which might affect the stone-setting.

We recommend storing your jewellery individually in the accompanied Tom Wood jewellery box or pouch bag as this prevents wear and tear. This could also help avoid the jewellery from exposure to direct sunlight.  

Clean your jewellery with warm water and detergent free soap, or with a professional cleaning kit. Furthermore, we recommend your jewellery to be cleaned by a professional jeweler once a year to have it last longer. Cleaning of stone-settings should always be done by a professional.

よくある質問

Tom Wood は、925 スターリングシルバーや 9K ゴールドなどの高品質の貴金属のみを使用しています。当社の金属のほとんどはリサイクルされた資源に基づいており、「リサイクル」とラベル付けされています。

925 スターリングシルバーは「柔らかい」金属と見なされます。トム ウッドのシグネット リングのようなシルバー製の分厚いジュエリーは、他の表面との衝突にさらされやすく、へこみや小さな傷が生じる可能性があります。時間が経つにつれて、へこみや傷が混ざり合い、リングの表面が「柔らかく」なり、カットが目立たなくなります。傷や小さなへこみは欠陥とは見なされませんが、通常の摩耗の兆候に過ぎません。

当社のジュエリーはすべて変色防止処理が施されています。通常、当社の 925 スターリング シルバー ジュエリーには、強く耐久性のある表面を確保するために、ホワイト ロジウム メッキが施されています。それにもかかわらず、銀は時間の経過とともに酸化する可能性があります。これをできるだけ避けるために、着用後はジュエリーを柔らかい布で優しく拭き、汚れや油分を取り除いてください。シルバーポリッシュは、どの金細工師でも購入できます。

当社の金メッキ ジュエリーは、1 ミクロンの 9K ゴールドでメッキされています。メッキは使用に応じて時間の経過とともに自然に剥がれますが、プロの宝石商が再メッキすることができます。独自のゴールド仕上げを施しているため、ジュエラーでの修理は見た目が異なる場合があります。

スナップロックを開くには、まず両側にある 8 つのロックを開き、ロックを一緒につまんでスライドさせます。 8 つのロックにより、ネックレスとブレスレットのセキュリティが強化されます。ロックの開閉時に力を入れないようにしてください。メカニズムがずれないようにしてください。

ロックを開閉する際に力を入れず、開ける前にロックの動作を確認してください。チェーンやブレスレットを曲げたり引っ張ったりしないでください。そうすると壊れる可能性があります。

保管する際には、チェーンが絡まっていないことを確認し、チェーンやブレスレットを曲げたり壊したりしないように、柔らかいポーチに入れて保管してください。

いかなる種類のジュエリーにも、当社の合金にニッケルを使用していないことに注意してください。耳のピアスを着用すると刺激が発生する場合がありますが、これは合金の金属の種類が原因である可能性があります.すべての合金は、異なる種類の金属のブレンドです。

片方の耳に複数のイヤーピースを装着している場合、イヤーリングが互いに引っかき合うことでメッキが剥がれやすくなる可能性があることに注意してください。

イヤリングのロック機構を開閉するときは、力を入れすぎないでください。耳を通るピンはデリケートで、時間の経過とともに曲がったり、ロック機構がすり減ったりする可能性があります。これが発生した場合は、ピンを慎重に調整してください。下のフィルムを参照してください。 Tom Wood の販売店の近くにいる場合は、その店に行って詳細な説明を受けることをお勧めします。